The XTRM 4130/08 is a 380 KV Brushless Outrunner with a current capacity of 60 amps @ 60 seconds. A maximum efficiency of 88%, a no load current @ 10vdc of 1.5 amps and an internal resistance of 63 Mohms. This outrunner has a 6mm shaft and is designed to run on 16-24 NiCad/NiMH cells or 5-8 LiPo cells. A 16x10 on 6 cells or a 14x10 on 7 cells for aircraft weighing up to 14 lbs. The XTRM 4130-08 weighs 14.1 oz. and the dimensions are 50 x 65mm. Includes 6mm Collet type prop adapter, radial mount and Gold Plated Bullet Connectors.

Recommended Model Weight:

• 3000 - 6000 grams (6.6 - 13.5 lbs.)

The XTRM 100A-LV weighs only 90g/3.2oz! Handles max current burst of 125 amps for 10 seconds. The XTRM 100A-LV measures 70x50x13mm and is equipped with the following features:

• No BEC (Opto)
• Li-Poly 2-7 cells
• NiMH/NiCad 6-20 cells
• Auto Low Battery Slow Down at 3.0V/Lipo
• Auto Cut-Off at 2.9V/Lipo or 0.8V NiMH & NiCad
• Dynamic Braking
• Auto shut down with loss of signal.

The XTRM 100A-LV is fully programmable! "See our Manual Downloads Section for Programming Instructions for 50A OPTO ESC and Up".

Programmable Options:

• Battery Setting
• Throttle Range
• Brake Setting 4 Options: None, Soft, Medium & Hard
• Direction (clockwise or counter clockwise) and Cut-Off Type (soft/slowdown or hard cut-off at low voltage)
• Timing Mode Setting: 1� /7� /15� /30�
• PWM Setting: 8K/16K