Hang-It RC XTRM 3520/06 & 60A OPTO ESC Brushless Combo

Shopping Cart - 0 item(s)

Gift Certificates

SALE!

Aircraft Storage Hangars

Brushless Motors

Heli Specific Motors

Brushless ESC's

Heli Specific ESC's

Brushless Combos

Connectors / Extensions

Prop Adapters

Propellers

Radial Mounts

Replacement Shafts

Voltage Displayer

Accessories

Scratch & Dent

Home > SALE!

XTRM 3520/06 & 60A ESC Combo

Item Id: X3520/06 & 60A ESC

XTRM 3520/06 and 60A OPTO ESC Combo

Email This Page To A Friend

Review This Item

Price: ~~$120.98~~
On Sale::

$105.98

In Stock

Quantity

Add to Wish List

Description:

For aerobatic and 3D models (3D to 4 pounds) weighing 3-6 lbs. The XTRM 3520/06 is a 800 KV Brushless Outrunner with a current capacity of 50 amps @ 60 seconds. A maximum efficiency of 82%, a no load current @ 10vdc of 2.1 amps and an internal resistance of 50 Mohms. This outrunner has a 5mm shaft and is designed to run on 8-20 NiCad/NiMH cells or 3-7 LiPo cells. Includes Radial Mount, 5mm Collet type prop adapter and 3.5mm Gold Plated Bullet Connectors. The motor weighs in at 7.1 oz. and the dimensions are 42 x 47mm.

The XTRM 60A ESC OPTO weighs only 63g/2.21oz! It can handle a max current burst of 70 amps for 10 seconds. The XTRM 60A measures 55x35x8mm and is equipped with the following features:

-No BEC (Opto)
-Li-Poly 2-7 cells
-NiMH/NiCad 6-20 cells
-Auto Low Battery Slow Down at 3.0V/Lipo
-Auto Cut-Off at 2.9V/Lipo or 0.8V NiMH & NiCad
-Dynamic Braking
-Auto shut down with loss of signal.

The XTRM 60A ESC is fully programmable! "See our Manual Downloads Section for Programming Instructions for 50A OPTO ESC and Up."

Programmable Options:
Battery Setting
Throttle Range
Brake Setting 4 Options: None, Soft, Medium & Hard
Direction (clockwise or counter clockwise) and Cut-Off Type (soft/slowdown or hard cut-off at low voltage)
Timing Mode Setting: 1ï¿½ /7ï¿½ /15ï¿½/30ï¿½
PWM Setting: 8K/16K

Recommended Model Weight: