| For Aerobatic Park flyer models weighing 10-28 oz. The XTRM 2212/15 is a 930 KV Brushless Outrunner with a current capacity of 18 amps @ 60 seconds. A maximum efficiency of 80%, a no load current @ 10vdc of 0.4 amps and an internal resistance of 105 Mohms. This outrunner has a 3.17mm shaft and is designed to run on 6-10 NiCad/NiMH cells or 2-3 LiPo cells. Great for park flyers & 3D foamies. The motor weighs 47 grams (1.6 oz.)and dimensions are 27.5 x 23.7mm. For small park flyers, manufacturer suggests an 11x4.7 prop on 2 cells or a 10x5 on 3 cells. We have been using a 12x4.7 prop on 2 cells and a 12x3.8 on 3 cells, with great results! Includes Radial Mount, 3.17mm Collet type prop adapter and 2mm Gold Plated Bullet Connectors.
The XTRM 20A ESC weighs only 25g/0.9oz! It can handle a max current burst of 25 amps for 10 seconds. The XTRM 20A measures 32x24x7mm and is equipped with the following features:
-
2A BEC
-
Li-Poly 2-3 cells
-
Ni-MH 4-10 cells Auto Detect
-
Auto Low Battery Slow Down at 3.0V/Lipo
-
Auto Cut-Off at 2.9V/Lipo
-
Break On/Off
-
Auto shut down with loss of signal.
The XTRM 20A ESC is not programmable, other than brake and battery type settings, and is very easy to use. "See our Manual Downloads Section for Simple Programming Instructions".
Recommended Model Weight:
- 300 - 800 grams (10 - 28.2 ounces)
|
Shopping Cart - 0 item(s)
